Toshiba e-STUDIO281c Service Manual page 232

[A-13] Bypass feed sensor (S36)
(1) Take off the bypass unit (
Bypass unit").
(2) Remove 3 screws and take off the lower
plate.
(3) Disconnect 1 connector. Remove 1 screw
and take off the sensor plate.
(4) Release the latch to take off the bypass feed
sensor.
Note:
Be careful not to come off the sensor arm
and the sensor spring after taking off the
sensor.
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
P.10-9 "[A-1]
Lower plate
Sensor spring
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 18
Fig. 10-33
Sensor plate
Connector
Fig. 10-34
Sensor arm
Bypass feed sensor
Fig. 10-35