Toshiba e-STUDIO281c Service Manual page 207

(6) Disconnect 1 connector, remove 1 gear, 1 E-
ring and 1 bushing, and then take off the
black developer drive clutch.
Note:
Place the stopper when installing the clutch.
(7) Remove 5 screws and take off the bracket.
(8) Remove 1 clip and 1 gear.
(9) Remove 1 clip and 1 bushing. Remove 1
gear.
(10) Disconnect 1 connector and take off the color
developer drive clutch.
Note:
Place the stopper when installing the clutch.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Gear
E-ring
Bushing
Fig. 9-19
Bracket
Fig. 9-20
Gear
Color developer drive clutch
Fig. 9-21
9 - 13
Connector
Black developer drive clutch
Gear
Clip
Connector
Clip
Bushing
e-STUDIO281c/351c/451c
DRIVE SYSTEM
9