[B-2]
Developer material
(1)
Remove 2 screws, release 5 hooks and take
off the toner holder by rotating it.
Notes:
1. Do not try to release the hooks forcibly.
2. When installing the toner holder, rotate
the holder with hooking the magnet roller
side of it.
3. When installing the toner holder, be care-
ful not to peel the seal.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Toner holder
Fig. 12-34
Fig. 12-35
Fig. 12-36
12 - 23
e-STUDIO281c/351c/451c
DEVELOPER UNIT
12