(4)
Lift up the transfer belt unit and insert the
screw removed in step (3) into the screw
hole on the front side.
(5)
Loosen 1 screw and take off the drum stay.
(6)
Remove 2 screws and take off the bushing of
the drum.
e-STUDIO281c/351c/451c
DRUM RELATED SECTION
Drum stay
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
11 - 14
Transfer belt unit
Screw
Fig. 11-18
Fig. 11-19
Bushing
Fig. 11-20