Toshiba e-STUDIO281c Service Manual page 162

[C] Automatic original detection sensor (APS sensor)
[C-1] A4 series (APS-1, -2, -3, -C, -R)
(1) Take off the original glass (
Original glass").
(2) Disconnect 1 connector and remove 1 screw
for each APS sensor. Take off 5 APS sen-
sors.
[C-2] LT series (APS-1, -3, -C, -R)
(1) Take off the original glass (
Original glass").
(2) Disconnect 1 connector and remove 1 screw
for each APS sensor. Take off 4 APS sen-
sors.
e-STUDIO281c/351c/451c
SCANNER
P.6-17 "[A]
P.6-17 "[A]
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 18
Fig. 6-22
Fig. 6-23