Toshiba e-STUDIO281c Service Manual page 120

Hide thumbs Also See for e-STUDIO281c:

Table of Contents

"Dispose of used toner" is displayed

Toner bag full detection sensor (S20) is turned ON during printing

Printing is stopped after the paper being printed is exited

Solution: Replace the toner bag with new one and close the front cover.

(G)Call for service

Check the error code displayed on the control panel when "Call for service" appears, and handle the

abnormality in reference to the error code table in Service Handbook.

e-STUDIO281c/351c/451c

GENERAL OPERATION

E-studio351c E-studio451c