Toshiba e-STUDIO281c Service Manual page 234

[B-3] Paper stock sensor (S31/S32)
(1) Take off the drawer feeding unit (
"[B-1] Drawer feeding unit").
(2) Pull up the paper stock sensor arm.
(3) Disconnect the connector and release the
latch to take off the paper stock sensor.
[B-4] Separation roller
(1) Take off the drawer feeding unit (
"[B-1] Drawer feeding unit").
(2) Remove 1 screw and take off the separation
roller holder.
(3) Detach the lever from the holder and take off
the separation roller with the shaft.
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
P.10-19
P.10-19
Separation roller holder
Holder
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 20
Paper stock sensor
Sensor arm
Fig. 10-38
Fig. 10-39
Lever
Separation roller
Fig. 10-40