Toshiba e-STUDIO281c Service Manual page 235

(4) Detach the cover, the arbor and the clutch
spring from the shaft, and then takeoff the
separation roller.
[B-5] Feed roller
(1) Take off the separation roller holder
( P.10-20 "[B-4] Separation roller").
(2) Remove the clip and take off the feed roller.
[B-6] Pickup roller
(1) Take off the drawer feeding unit (
"[B-1] Drawer feeding unit").
(2) Remove the pickup roller assembly from the
pickup arms and take off the belt.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Arbor
Cover
Clutch spring
Feed roller
Clip
P.10-19
Belt
10 - 21
05/08
Separation roller
Shaft
Arbor
Fig. 10-41
Fig. 10-42
Pickup roller assembly
Fig. 10-43
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10