Toshiba e-STUDIO281c Service Manual page 228

[A-7] Bypass paper sensor (S35)
(1) Take off the bypass feed upper cover
( P.10-12 "[A-4] Bypass feed upper
cover").
(2) Remove 4 screws and take off the upper
plate.
(3) Take off the sensor arm.
(4) Disconnect the connector from the sensor
and release the latch to take off the bypass
paper sensor.
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
Upper plate
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 14
Fig. 10-22
Sensor arm
Fig. 10-23
Bypass paper sensor
Fig. 10-24