Toshiba e-STUDIO281c Service Manual page 359

Check Condi-
timing tion
At paper jam 1 250°C or above
* The figures in the "Condition" field denote the priority of error checking.
* The figures in the "Error code" and "Counter" fields with parentheses denote that an error status has
not yet been determined (= error status is detected only once).
* The pre-running end temperature may vary depending on the temperature of the environment in
which the equipment is placed. When a temperature detected by the equipment is low (16°C or
below) the pre-running end temperature set at 08-422 will be applied, and in all other cases, the
temperature set at 08-411 will be applied.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Temperature judged
Main
Sub thermistor
thermistor
-
- 250°C or above
- -
16 - 17
Error Counter
Front edge
code (08-400)
thermistor
- C449
-
250°C or above
FUSER UNIT / PAPER EXIT SECTION
Error
judging
timing
29 On usual
e-STUDIO281c/351c/451c
16