[E]
Color developer unit drive gear / Color toner supply drive gear
(1)
Take off the color developer unit (
"[B] Color developer unit").
(2)
Remove 1 screw, release 1 latch and take off
the holder. Then take off the color developer
unit drive gear and color toner supply drive
gear.
Notes:
1. When installing, insert the shaft of the
holder into the revolver unit securely.
2. Apply the grease to the shaft after the
replacement of the gears.
e-STUDIO281c/351c/451c
REVOLVER UNIT
P.12-21
Grease
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
13 - 10
06/07
Holder
Fig. 13-10
Grease
Fig. 13-11