Toshiba e-STUDIO281c Service Manual page 300

(10) Remove 2 screws and take off the toner
motor.
[E] Black toner supply auger unit
(1) Take off the black toner supply unit
( P.12-28 "[D] Black toner supply unit").
(2) Take off the black developer lifting unit
( P.12-27 "[C] Black developer lifting unit").
(3) Remove 1 screw and take off the rail.
(4) Remove 2 screws and take off the black
toner supply auger unit.
e-STUDIO281c/351c/451c
DEVELOPER UNIT
Rail
Black toner supply auger unit
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
12 - 30
Toner motor
Fig. 12-55
Fig. 12-56
Screw
Fig. 12-57