Configuring Printranet; Configuring Wireless Settings - Avery Dennison MONARCH 9493 System Administrator Manual

C o n f i g u r i n g P r i n t r a N e t
You can enable POP3, set the Server Address, Mailbox Name, Password and more.
1. From the side menu, click PrintraNet.
Enter the IP address of the POP3 or SMTP server on your network where internet print jobs
2.
are located.
You may also specify a mailbox name and password. For no password required, enter a
single space in the field provided.
Click Submit.
3.
4. Click the reset link at the bottom of the screen. The Reset Server screen appears.
5. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until you reset the print
server.
You must re-enter your access password to make any further changes to the printer
settings.
C o n f i g u r i n g W i r e l e s s S e t t i n g s
You can change modes, specify your SSID, modify your channel (Ad-Hoc mode only), network
speed, access point density, and more. You can also configure network security. See
"Configuring Network Security" for more information.
4-6 System Administrator's Guide