Creating A New Product Data File; Configuring The Network Settings; Entering The Printer's Ip Address In The Edit Utility; Specifying The Printer's Type - Avery Dennison Monarch FreshMarx 9417 System Administrator Manual

C r e a t i n g a N e w P r o d u c t D a t a F i l e
You can use the Edit Utility to create a new data file.
1. Start the Edit Utility. The Main screen appears.
2. Click File, then New. A blank data file appears. To customize the data file, see "Editing the
Data File."
C o n f i g u r i n g t h e N e t w o r k S e t t i n g s
To communicate with the printer using Ethernet, enter your printer's IP Address within the Edit
Utility. See "Adjusting the Network Settings" in Chapter 3 to view your printer's IP Address.

Entering the Printer's IP Address in the Edit Utility:

1. Connect the printer to your computer using an
Ethernet cable.
2. Turn on the printer.
3. Start the Edit Utility.
4. Click Setup, then Network.
5. Enter the printer's IP address.
6. Click OK.
S p e c i f y i n g t h e P r i n t e r ' s T y p e
The printer is available as a single printer (left printer only) or dual printer (left and right
printer). Specifying the correct printer's type is important, so features display properly in the
Edit Utility.
1. Start the Edit Utility.
2. Click Setup, then Printer.
3. Select Single Printer or Dual Printer.
4. Click OK.
5-2 System Administrator's Guide