Ibm Aix Configuration; Configuration On Other Systems - Avery Dennison MONARCH 9493 System Administrator Manual

I B M A I X C o n f i g u r a t i o n
To configure a print server on IBM AIX 4.x, use the SMIT program as follows:
Enter SMIT and select Devices.
1.
2. Select Printer/plotter.
3. Select Manage remote printer subsystem.
4. Select Client services.
5. Select Remote printer queues.
Select Add a remote queue. Enter the following remote queue settings:
6.
♦
Name of queue to add (user selectable) Activate the queue (Yes).
♦
Destination host (print server's IP address; or if you have configured the /etc/hosts file,
use the name of the print server that you specified in that file).
♦
Name of queue on remote printer BINARY_P1 for binary files or TEXT_P1 for text files).
♦
Name of device to add (user selectable; for example lp0).
7. You should now be able to print using the normal lp -d command.
Note: The configuration for earlier versions of AIX is slightly different.
The print server can also be configured as a JetDirect card using AIX. To do this, refer
to your AIX documentation.
C o n f i g u r a t i o n o n O t h e r S y s t e m s
The print server can be used with any computer system that supports the LPR/LPD protocol or
HP JetDirect (port 9100 is the default; however, it can be reconfigured). Refer to the system's
documentation to configure LPR/LPD or JetDirect print queues.
3-4 System Administrator's Guide