Electronic Configuration; Specifications Only For Ap 5.4 Dispenser / Ap 5.4 Internal Rewinder; Environmental Conditions - Avery Dennison AP 4.4 User & Service Manual

09/09 Rev. 5.03-01
You can find detailed information on the interfaces in the Service Handbook,
under the "Service Electronics" heading in the section on "CPU Boards", "Plug
Connectors".

Electronic Configuration

[Tab. 7] Electronic Configuration
Specifications only for AP 5.4 dispenser /
AP 5.4 Internal rewinder

Environmental Conditions

Operating Temperature 4 to 38°C
Storage Temp.
-4 to 60°C
Relative Humidity
30-85% (non-condensing)
Protection category
IP 21
Noise
70dB(A)
USER / SERVICE MANUAL
AP 4.4 – AP 5.4
Characteristic AP 5.4
Processor 32- bit IDT with 32- bit data bus
SDRAM 16 MB
ROM 4 MB Flash
A slot for Compact
Plug-in Cards Flash cards of type T1
with up to 64 MB
Present; printout of date
Real-time Clock
and time possible
4 buttons; LCD graphics display with 122x32 pixels; typi-
Control Panel
cally used to display two text lines with 16 characters each.
a) RoHS conform printer - is built approx. from 08/2006 on.
•
Speed, while the rewinding-Ø is calculated: 75 mm/s (3"/s)
•
Speed, while the material is fed back: 75 mm/s (3"/s)
•
Distance dispensing edge - print zero line: 25 mm
•
Distance punch sensor - print zero line: 71 mm
•
Max. admissible outer diameter of the rewound backing paper roll: 120 mm
Specifications
AP 4.4 AP 4.4 RoHS
8 MB 16 MB
2 MB Flash 4 MB Flash
-- --
-- --
10
a)