Using Ethernet Communications; Viewing The Ethernet Settings; Configuring Ethernet Settings - Avery Dennison Monarch 9419 Administrator's Manual

U s i n g E t h e r n e t C o m m u n i c a t i o n s
The printer communicates on a 10baseT or 100baseTX wired Ethernet connection.
The Ethernet options are listed in the table below.
Option
Status
Configure
Use the Printer Management Utility to configure the Ethernet settings. See
Ethernet Settings" for more information

Viewing the Ethernet Settings

Select Status from the Ethernet menu to view the current Ethernet settings.
The viewable Ethernet settings include MAC Address, IP Address, Subnet Mask, and
Default Gateway. The Media Access Control (MAC) Address is a hard-coded value that
cannot be changed (like a serial number).

Configuring Ethernet Settings

Select Configure from the Ethernet menu to change the Ethernet settings.
1.
Select either DHCP or Static:
2.
Static Use if your network uses a fixed configuration. The IP address remains the
same every time the device connects to the network. For static, you must
set an IP Address, Subnet Mask, and Default Gateway. See
Static IP Address, Subnet Mask and Default
DHCP The network automatically assigns an IP address within a specified range to
a device when it is first turned on. A device could have a different IP
address every time it connects to the network.
3. Select Yes to save the DHCP setting. The printer reboots and
establishes a connection. Or, press No to exit without saving.
Choices
View only
DHCP/Static IP
Classification: Avery Dennison - Public
Default
None – view only
DHCP
"Configuring
"Entering a
Gateway" for more information.
Setting Communications 4-3