Troubleshooting Wireless Configuration Problems; Technical Support - Avery Dennison MonarchNet2 9855 Operating Insructions

T r o u b l e s h o o t i n g W i r e l e s s C o n f i g u r a t i o n P r o b l e m s
Your computer's wireless adapter and/or access point should be
1.
configured to match your print server.
The printer should be within range (90 meters or 300 feet) of your
2.
computer and away from metal objects and other devices with radio
signals (Bluetooth®, 2.4 GHz cordless phones, and microwaves).
Use infrastructure mode to connect through an access point.
3.
Use Ad-Hoc mode to connect without an access point.
To use encryption or password protect your wireless network, and
4.
your wireless adapter or access point normally uses a password or
pass-phrase instead of WEP, it should allow you to enter 0x followed
by a ten digit (for 40-bit or 64-bit WEP) or twenty-six digit (for 128-bit
WEP) key in hexadecimal format (0-9 or A-F).
Change the RF channel (Ad-Hoc mode only) to correct intermittent
5.
connection problems or slow performance. Change it to at least
three channels lower or higher than any other wireless networks
within range.
T e c h n i c a l S u p p o r t
If these solutions do not work, call Service at the number listed on the
back of this manual.
Troubleshooting 6-7