Troubleshooting - Avery Dennison 6059 Operator's Handbook Manual

T R O U B L E S H O O T I N G
This chapter lists some common printer problems and their solutions.
Problem
Printer does not feed.
Printer does not print.
Print has voids or is too light.
Printer partially prints on the
supply and fails to respond to
the keypad or trigger.
Scanner does not scan a bar
code.
The display does not turn on.
Any RFID messages to note?
Solution
Switch to a fully charged battery.
Close the supply cover completely.
Load the supply correctly. See "Loading Supplies" in
Chapter 2 for more information.
Check the platen roller for jammed labels.
Make sure the pinch roller is in place.
Switch to a fully charged battery.
Load the supply correctly. See "Loading Supplies" in
Chapter 2 for more information.
Clean the printhead. See "Cleaning the Printhead" in
Chapter 4 for more information.
Load the supply correctly. See "Loading Supplies" in
Chapter 2 for more information.
Close the supply cover completely.
Switch to a fully charged battery.
Clean the printhead. See "Cleaning the Printhead" in
Chapter 4 for more information.
Check the supply for damage or defects.
Load the supply correctly or load new supplies, if
necessary. See "Loading Supplies" in Chapter 2 for
more information.
Clear any supply jams.
Clean the printhead. See "Cleaning the Printhead" in
Chapter 4 for more information.
Switch to a fully charged battery.
See "Scanning Bar Codes" in Chapter 3 for more
information.
Make sure the power is on.
Switch to a fully charged battery.
Classification: Avery Dennison – Public
5

Troubleshooting 5-1