Entering A Static Ip Address, Subnet Mask, And Default Gateway - Avery Dennison Monarch 9419 Administrator's Manual

Entering a Static IP Address, Subnet Mask, and Default Gateway

The IP (Internet Protocol) address is a unique identifier for a device on a network. It
consists of four 3-digit numeric fields, separated by periods.
IP networks are divided using subnet masks. The subnet mask address determines
where the IP address belongs in the network. It consists of four 3-digit numeric fields.
The default gateway (or router) allows connections (communications) between different
subnets on a network. It consists of four 3-digit numeric fields.
To set the static IP Address, Subnet Mask and Default Gateway:
Use the buttons as shown below:
1.
Select
Navigation button:  or 
Navigation button:  or 
Press Select when finished entering the IP Address, Subnet Mask, and Default
2.
Gateway.
Press Yes to save the settings. The printer reboots and establishes a connection.
3.
Or, press No to exit without saving.
4-4 Online Mode System Administrator's Guide
To
Selects which position to change.
Increase or decrease the number.
Classification: Avery Dennison - Public