Removal Of The Rear Cover; Removal Of The Input Cover - Barco Prometheus III Installation Manual

Removal and installation of the projector covers
Image 11-4: Light Source cover, removal

11.2 Removal of the rear cover

Required tools
Flat screwdriver
How to remove
1. Release both captive screws almost at the bottom of the rear cover using a flat screw driver (1).
2
1
Image 11-5: Rear housing removal
2. Remove the rear cover of the projector doing the following:
1. gently pull out the top covers of the rear cover (2).
2. then move the rear cover away from the projector.

11.3 Removal of the input cover

Required tools
Flat screwdriver
138 R5906897 /02 Prometheus III
2
1