Setting Select Memory Channels; Setting In The Scan Screen; Setting In The Memory List Screen; D Erasing The Select Scan Setting - Icom IC-7850 Instruction Manual

12
SCANS

■ Setting Select memory channels

D Setting in the Scan screen
 The Multi-function screens are OFF.
Push [V/M].
q
• Selects the Memory mode.
• Pushing [V/M] toggles between the VFO and Memory
modes.
e Push [SCAN](F).
• The Scan screen is displayed.
r Select the desired memory channel to set as a Se-
lect memory channel.
• The [p] or [q] keys and direct keypad selections can be
used.
Push [SELECT](F) several times to set the memory
t
channel as a Select memory ★1, ★2, ★3 or not.
Repeat steps r to t to program another memory
y
channel as a Select memory channel, if desired.
Push [EXIT/SET]
u
• Exits the Scan screen.
D Setting in the Memory list screen
 The Multi-function screens are OFF.
Push [MEMORY](F)
q
• The Memory list screen is displayed.
Rotate [MAIN DIAL] while pushing [ROLL](F) or
w
[SET](F) to select the desired memory channel.
• The [p] or [q] keys and direct keypad selections can
also be used.
Push [SELECT](F) several times to set the memory
r
channel as a select memory ★1, ★2, ★3 or not.
Repeat steps e to r to program another memory
t
channel as a Select memory channel, if desired.
Push [EXIT/SET].
y
• Exits the Memory list screen.

D Erasing the Select scan setting

 The Multi-function screens are OFF.
Push [MEMORY](F) to enter the Memory list screen,
q
or push [SCAN](F) to enter the Scan screen.
Hold down [SELECT](F) for 1 second to display the
w
Memory select all clear window.
Push one of the following keys to clear all Select
e
channel settings.
[★1](F): Clears all ★1 settings.
[★2](F): Clears all ★2 settings.
[★3](F): Clears all ★3 settings.
[★1,2,3](F): Clears all Select settings.
Push [EXIT/SET].
r
• Exits the Memory list screen.
• Setting the Select memory channels
• Setting the Select memory channels
• Erasing the Select memory channel scan settings
12-8