Setting Select Memory Channels - Icom IC-718 Instruction Manual

Setting select memory channels

D Setting in scan screen
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Select memory mode.
e Push [SCAN] (F-5) to select the scan screen.
r Select the desired memory channel to set as a se-
lect memory channel.
• [∫]/[√] keys and direct keypad selections can be used.
(p. ??)
t Push [SELECT] (F-3) several times to set the
memory channel as a select memory
or not. (p. ??)
• " 1," " 2" or " 3" appears on the LCD to show that
the channel is specified as the select memory.
y Repeat steps r to t to program another memory
channel as a select memory channel.
u Push [EXIT/SET] to exit the scan screen.
D Setting in memory list screen
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [MEMORY] (F-4) to select memory list
screen.
e Rotate the main dial while pushing [ROLL] (F-1) or
[SET] (F-2) to select the desired memory channel.
• [∫]/[√] keys and direct keypad selections can be used.
(p. ??)
r Push [SELECT] (F-3) several times to set the
memory channel as a select memory
or not.
• " 1," " 2" or " 3" appears on the LCD to show that
the channel is specified as the select memory.
t Repeat steps e to r to program another memory
channel as a select memory channel.
y Push [EXIT/SET] to exit the memory list screen.
D Erasing the select scan setting
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [MEMORY] (F-4) to select memory list
screen, or push [SCAN] (F-5) to select scan
screen.
e Push and hold [SELECT] (F-3) for 1 sec. to display
memory select all clear window.
r Push one of the following keys to clear all select
scan setting.
[ 1] (F-1) : Clears all
[ 2] (F-2) : Clears all
[ 3] (F-3) : Clears all
[ 1,2,3] (F-4) : Clears all select setting.
t Push [EXIT/SET] to exit the memory list screen.
1, 2, 3
1, 2, 3
1 setting.
2 setting.
3 setting.
7
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
110