Call Recording With Autostart; Controlling Call Recording - Unify CP200 User Manual

152
] or
Recording
Recording

Call recording with AutoStart

Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re-
cording starts automatically.
^
Lift the handset.
or
:
Press the key shown.
[
The subscriber answers. You hear a beep, the recording symbol
on the display and the recording button LED remains lighting. The call is now be-
ing recorded. (see also
You can pause the recording at any time and continue it again.
:
If you end the call, the AutoStart process is set up again for the next call.

Controlling call recording

Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has not started. The recording button LED is not lighting.
[
You are conducting a call (see also
Press the recording button to start the recording - the LED key lights up.
_
You hear a beep and the recording symbol
is now being recorded. (see also
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has started. The recording button LED lights up.
[
You are conducting a call (see also
Press the recording button to pause the recording - the LED extinguishes and
¤
the recording symbol
You can start the recording again at any time, for example to continue recording
the current call.
page 150)

page 150).

|
page 150)

page 150).

|
on the display disappears.
|
is shown
is shown on the display. The call