Call Recording - Unify OpenStage 60 Administration Manual

administration.fm
Administration
Feature Configuration
Administration via Local Phone
|
--- Admin
|
--- System
|
--- Features
|
--- Configuration
|
--- General
3.7.13

Call Recording

With firmware version V2R2, call recording is possible for OpenStage 15/20/40/60/80 using an
" ASC Voice Recorder". The implementation is similar to a local conference, with the recording
device acting as the third conference member. To start recording, the phone calls the recording
device and provides it with the mixed audio data. Unlike a true local conference, the call leg
used for recording can not transport audio from the recording device to the phone.
With the Call recording mode/Recording Mode parameter, the behaviour of the feature is de-
termined:
• "Disabled": Recording is not possible.
• "Manual": The user starts and stops recording manually using the menu or a free program-
mable key.
• "Auto-start": The recording starts automatically; besides, the user can stop and start the
recording manually.
• "All Calls": The recording starts automatically for all recordable calls; the user can not stop
or start the recording manually.
The Audible indication/Audible Notification parameter determines if and how the parties in
a call are informed when a call is being recorded:
• "Off": No audible indication is given.
• "Single-shot": A single audible indication is given when recording commences or resumes.
• "Repeated": An audible indication is given when recording commences or resumes, and
repeated periodically during the recording.
With the Recorder Address/Recorder number parameter, the SIP address of the call recorder
is specified.
148
|
--- Not used timeout
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015