Copy Program By Port Number - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
This program is available only via telephone programming and not through PC Programming.
Program
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each
92
outside line.
Input Data
Item No.
01
02
03
Refer to Program
Conditions
None
Feature Cross Reference
None
2-640

92-03 : Copy Program by Port Number

Program Number
Item
Source Number • For Trunk Base : Trunk Port Number
• For Trunk Group Base : Trunk Group
Destination Number (From)
• For Extension Number : 1 ~ 128
• For Department Group Base : De-
Destination Number (To)
• For DSS : (DSS Console Number 1 ~
92-01 Copy Program on page 2-636
Program 92 : Copy Program
Input Data
1 ~ 128
Number 1 ~ 50
partment Group Number 1 ~ 50
12
for program that can be copied.
ISSUE 2.0
XX-XX
Description
Enter the port number from where
the data is to be copied.
Enter the first port number to
where the information is to be
copied
Enter the last port number to
where the information is to be
copied. If the information is to be
copied only to one port, enter the
information entered in the Desti-
nation Number (From) entry.
Program 92 : Copy Program