Power Cable; Connecting The Power Cable; Network/Crossover Connections; Connecting The Network Cable - µ-Dimension 180-00108 uPrint User Manual

Setup

Power cable

Connecting the power cable:

1. Connect the power cable to the back of the printer.
2. Connect the power cable to the dedicated power outlet. See

Network/Crossover connections

Connecting the network cable:

1. Connect the network cable (blue) to the network connection at the back of the printer. See
2. Connect the network cable to the dedicated outlet or network hub.
If not using a network and connecting directly to a PC, you will need to use a crossover cable.

Connecting the crossover cable:

1. Connect the crossover cable (orange) to the network connection at the back of the printer. See
16
2. Connect the crossover cable to the computer.
Document Number 206465-0001
Do not use an extension cord or a power strip, using these
can possibly cause intermittent power issues.
Figure 15: Power cable connection
Figure 15.
Note:
20
Figure 16
Figure
User Guide