System Software Overview - µ-Dimension 180-00108 uPrint User Manual

Operation

System software overview

This is a brief overview of the sections on the Display Panel.
Idle: If there is no part being built and no part in the build queue, the display will show that the printer is
•
Idle.
Wait for Part or Start Part: If the printer is in Idle and the build queue is empty, you can set it to wait
•
for a part. If the printer has a part in the build queue, you can press Start Part to start a build.
Building: If the printer is building a part, you can choose to pause, set the lights either ON or OFF,
•
view the print time or material remaining and set the printer to auto power down.
Material: From this section you can load material, unload material or replace material.
•
Standby: From this section you can set the printer to Standby mode.
•
Maintenance: From this section you can make changes to the System, Setup or Machine.
•
Wait for Part Start Part
Building
• Pause
• Lights Off
• Show Time
• Auto Power Down
Document Number 206465-0001
Figure 30: Display panel hierarchy
Idle
Material
• Load Material
• Unload Material
• Replace Material
System
• Set Network
• Test Parts
• Load Upgrade
Standby
Setup
• Lights Always On
• Select Language
35
Maintenance
Machine
• Gantry
• Head
• Tips
User Guide