µ-Dimension 180-00108 uPrint User Manual page 62

Troubleshooting and Maintenance
Insert small standard
screwdriver to pry tip shields
from tips.
4. Clean the tip using the wire brush supplied with the Welcome Kit to remove any debris. See
5. Install a new tip shield by pushing it, by hand, over the exposed tip, keeping the slotted end towards
the back of the tip. See
6. Exit Maintenance.
Document Number 206465-0001
Figure 49: Tip Shield Removal
Figure 50: Clean tips with wire brush
Clean the tips using a wire brush.
Figure 54
Tip plate
Tip shield
Figure 50
User Guide
62