µ-Dimension 180-00108 uPrint User Manual page 31

Setup
2. Add the model material carriers to the first model material bay (M1) and the second model material bay
(M2) by inserting the carrier into the material bay and pushing the carrier in until it latches. See
23
3. Repeat for support.
Loading material to the head for the dual material bays
1. Once the material carriers have been added to the material bays, press Load... Select Materials will
now be displayed.
2. Select the material bays that you want to be active, or loaded to the head. Select Next Model for the
next model bay, this will toggle between M1 and M2, or Next Support for the next support bay, this will
toggle between S1 and S2. A carrot will be placed next to the material bay that will be activated.
Press Next Model to toggle between M1 and M2
Press Next Support to toggle between S1 and S2
3. When the material bays have been selected, you can now press Load Selected. The display will show
Loading and which model material bay has been selected. After the model material has been loaded
to the head, the display will show Loading and the support material bay which has been selected.
Document Number 206465-0001
Figure 25: Adding carriers to the dual material bay
Press Material...
Figure 26: Select material bay
31
Figure
User Guide