Removing The Eeproms From The Material Guides - µ-Dimension 180-00108 uPrint User Manual

Recycling 73
Follow your local recycling guidelines when recycling electronic components.

Removing the EEproms from the material guides

1. Open the model and support material carriers and remove the material guides.
2. With a small standard screwdriver, pry the two material guide halves apart. See Figure 58.
Figure 58: Pry the model material guide apart
Pry apart with a small standard
3. Recycle the EEPROM per your local electronics recycling guidelines.
4. Recycle the material guides per your local guidelines. See Table on page 72.
User Guide
Document Number 206465-0001