µ-Dimension 180-00108 uPrint User Manual page 51

Troubleshooting and Maintenance
Problem or error
message on display
panel
Material Error
Filament error
Material Error
Filament blocked
Material Error
Carrier invalid
Material Error
Filament broken
Load Error
Filament blocked
Load Error
Purge failed
Unload Error
Unload failed
Pausing
Document Number 206465-0001
Solution
Remove the carrier and verify material is coming out of the
material guide.
Verify material pulls freely from the carrier.
Verify the material tubes are free of material.
Reload material.
Remove carrier and verify material pulls freely from carrier.
Verify the material tubes are free of material.
Reload material.
Remove carrier and verify it is not empty.
Replace material spool.
Remove the carrier and verify material is coming out of the
material guide.
Verify material pulls freely from the carrier.
Verify the material tubes are free of material.
Remove the carrier and verify material is coming out of the
material guide.
Verify the material pulls freely from the carrier.
Verify the material tubes are free of material.
Remove the carrier and verify material is coming out of the
material guide.
Verify the material pulls freely from the carrier.
Verify the material tubes are free of material.
Check for and clear any excess material build up around
the tips.
Remove the carrier and verify the material tubes are free of
material.
Press Resume.
Unload the material carriers and reinstall.
51
User Guide