Table of Contents
Advertisement
Figure 10
Connecting directly to a workstation
Power Connections
This section discusses the procedure for preparing all power connections for the printer.
CAUTION:
in the off (down) position. It is located at the rear of the printer, next to the power cord
attachment point.
The printer is provided with two power cords: one for 1 10V (U.S. power cord) and one for 220V
(Europe power cord).
1.
Connect the male end of the supplied power cord directly into a grounded electrical outlet, as
shown in
the UPS.)
2.
Connect the female end of the power cord directly into the rear of the cabinet. See
CAUTION:
cord directly into the receptacle or UPS.
Before connecting power to the printer, make sure that the circuit breaker is
Figure 1 1.
(If using a Uninterrupted Power Supply (UPS), connect the cord directly into
Do not use an extension cord or power strip with the system. Connect the
13
Figure 1 1.
Hide quick links:
Advertisement
Table of Contents
