Setup
Initial Language Setup
Upon first start up of the uPrint 3D printer, you will need to set your default language.
Setting your default language:
1. From the display panel press Maintenance.
2. Press Setup.
3. Press Select Language.
4. Select the default language you will be using and press the corresponding button.
•
English
•
Spanish
•
Italian
•
German
•
French
•
Chinese
•
Japanese
5. The display panel will ask Are You Sure? Press Yes.
Software
There are two software programs that work with uPrint. First there is CatalystEX which is the
preprocessing software that controls the uPrint 3D printer. The second software program is the system
software, which is factory installed on the printer. Because there are occasional changes to this software,
you will have to verify that you have the latest version installed.
Installing CatalystEX:
1. Insert the CatalystEX installation CD into your CD-ROM drive of your computer.
2. If autorun is enabled, the setup screen should come up in a pop up window after you insert the Cata-
lystEX CD. If autorun is not enabled, you will have to navigate to the CD-ROM directory and launch the
setup.exe application.
3. Click the Install button.
4. Follow the prompts to finish loading the CatalystEX software.
Document Number 206465-0001
CatalystEX's installation setup allows you to change or
confirm the target installation directory. To install CatalystEX
in a directory other than the default, type the path and
directory name in the dialogue box when prompted.
Note:
22
User Guide