Changing Directories - Alcatel-Lucent OmniSwitch 6450 Management Manual

Managing System Files

Changing Directories

Use the cd command to navigate within the file directory structure. The
"up" or "down" the directory tree. To go down, you must specify a directory located in your current direc-
tory. The following command example presumes your current directory is the /flash file directory as
shown in the directory on
directory.
->pwd
/flash
->cd certified
->
To verify that your current directory has changed to /flash/certified, use the
following will be displayed:
->pwd
/flash/certified
To move "up" the directory tree, use the
tory name and your current directory will move up one directory level. If you enter
your current directory will move to the top of the tree. The following example shows the
used where the current directory is /flash/certified.
->pwd
/flash/certified
-> cd
->
To verify that your current directory has moved up the directory tree, use the
your location. The display shows you have moved up one level from the /flash/certified directory and that
your current directory is /flash.
-> pwd
/flash
If you use the cd command while you are at the top of the directory tree, the
effect on the location of your login. In other words, if you use
your current directory will remain /flash after you execute the
OmniSwitch 6250/6450 Switch Management Guide
page 1-8 and that you want to move down the directory tree to the certified
cd command. Enter cd.. (cd dot dot) without specifying a direc-
June 2013
File and Directory Management
cd command allows you to move
pwd command and the
cd without the dots,
pwd command to display
cd command will have no
cd while your current directory is /flash,
cd command.
cd command
page 1-9