Application Examples For File Management; Transferring A File To The Switch Using Ftp - Alcatel-Lucent OmniSwitch 6450 Management Manual

Managing System Files

Application Examples for File Management

The following sections provide detailed examples of managing files and directories on the switch.

Transferring a File to the Switch Using FTP

In this example, the user is adding a security feature to an OmniSwitch 6250 switch. To do this, the user
must load the KFsecu.img image file onto the switch and then register the file by rebooting the switch.
The following steps describe how to transfer the file from the user workstation to the switch by using an
FTP client on the workstation:
1 Load the KFsecu.img file onto a workstation that contains an FTP client.
You will normally receive the file from the Internet, via E-mail, or on CD media. Place the file on your
workstation where it can be easily downloaded.
2 Run the FTP client software on your workstation.
Most workstations have an FTP client installed. Refer to your manufacturer instructions for details on
running the FTP application.
3 Log in to the switch from your FTP client.
Where the FTP client asks for Name, enter the IP address of your switch. Where the FTP client asks for
User ID, enter "admin". Where the FTP client asks for Password, enter "switch" or your custom config-
ured password.
4 Transfer the file from the workstation to the switch by using the FTP client.
If you have a GUI FTP client, select the KFsecu.img file on your desktop and click the download button.
If you have a text only FTP client, use the FTP "put" command to move the file from your desktop to the
switch. In either case, you must specify a binary file transfer because the KFsecu.img file is a binary file.
Once the transfer is complete, the file will appear in the switch /flash/working directory.
5 Close the FTP session with the switch.
6 To verify that the KFsecu.img file is in the /flash/working directory on the switch. Log onto the
switch and list the files in the /flash/working directory.
-> ls /flash/working
Listing Directory /flash/working:
drw 2048 Aug 4 10:45 ./
drw 2048 Aug 5 14:05 ../
-rw 670979 Aug 5 14:44 KFsecu.img
-rw 2877570 Aug 4 10:33 KFbase.img
-rw 217119 Aug 4 10:33 KFdiag.img
-rw 727663 Aug 4 10:33 KFeni.img
-rw 5519 Aug 4 10:34 KFrelease.img
-rw 880 Sep 31 13:05 boot.cfg
This list verifies that the file is located on the switch in the /flash/working directory.
7 Reboot the switch to register the security file KFsecu.img.
The features and services supported by the Ksecu.img image file are now available on the switch.
OmniSwitch 6250/6450 Switch Management Guide
Application Examples for File Management
June 2013 page 1-29