Closing A Secure Shell Ftp Session - Alcatel-Lucent OmniSwitch 6450 Management Manual

Loading Software onto the Switch
-> sftp6 fe80::a00:20ff:fea8:8961 int1
login as:
Note. SFTPv6 sessions are supported only on the OmniSwitch 6250. It is mandatory to specify the name
of the particular IPv6 interface, if the SFTPv6 server has been specified using its link-local address.
2 You must have a login and password that is recognized by the IP address you specify. When you enter
your login, the device you are logging in to, will request your password as shown here.
-> sftp 10.222.30.125
login as: rrlogin2
rrlogin2's password for keyboard-interactive method:
3 After logging in, you will receive the sftp> prompt. You may enter a question mark (?) to view
available Secure Shell FTP commands and their definitions as shown here.
sftp>?
Available commands:
cd path
lcd path
chmod mode path
help
get remote-path [local-path]
lls [path]]
ln oldpath newpath
lmkdir path
lpwd
ls [path]
mkdir path
put local-path [remote-path]
pwd
exit
quit
rename oldpath newpath
rmdir path
rm path
symlink oldpath newpath
version
?
Note. Although Secure Shell FTP has commands similar to the industry standard FTP, the underlying
protocol is different.

Closing a Secure Shell FTP Session

To terminate the Secure Shell FTP session, issue the
-> exit
Connection to 11.333.30.135 closed.
This display indicates the Secure Shell FTP session with IP address 11.333.20.135 is closed. The user is
now logged into the OmniSwitch as a local device with no active remote connection.
page 1-24
Change remote directory to 'path'
Change local directory to 'path'
Change permissions of file 'path' to 'mode'
Display this help text
Download file
Display local directory listing
Symlink remote file
Create local directory
Print local working directory
Display remote directory listing
Create remote directory
Upload file
Display remote working directory
Quit sftp
Quit sftp
Rename remote file
Remove remote directory
Delete remote file
Symlink remote file
Show SFTP version
Synonym for help
exit command. The following will display:
OmniSwitch 6250/6450 Switch Management Guide
Managing System Files
June 2013