Alcatel-Lucent OmniSwitch 6450 Management Manual page 346

Hide thumbs Also See for OmniSwitch 6450:
Table of Contents

Advertisement

SNMP Traps Table
No. Trap Name
97
alaPimInvalidRegister
alaPimGroupMappingPimMode—The PIM mode used for groups in this group prefix.
alaPimInvalidRegisterAddressType—The address type stored in alaPimInvalidRegisterOrigin, alaPimInvalid
RegisterGroup and alaPimInvalidRegisterRp. If no unexpected Register messages are received, the onject is set
to "Unknown".
alaPimInvalidRegisterOrigin—The source address of the last unexpected Register message received by this-
device
alaPimInvalidRegisterGroup—The IP multicast group address to which the last unexpected Register message
received by this device was addressed.
alaPimInvalidRegisterRp—The RP address to which the last unexpected Register message received by this
device was delivered.
98
alaPimInvalidJoinPrune
alaPimGroupMappingPimMode—The PIM mode used for groups in this group prefix.
alaPimInvalidRegisterAddressType—The address type stored in alaPimInvalidRegisterOrigin, alaPimInvalid
RegisterGroup and alaPimInvalidRegisterRp. If no unexpected Register messages are received, the onject is set
to "Unknown".
alaPimInvalidJoinPruneOrigin—The source address of the last unexpected Join/Prune message received
alaPimInvalidJoinPruneGroup—The IP multicast group address carried in the last unexpected Join/Prune
message received
alaPimInvalidJoinPruneRp—The RP address carried in the last unexpected Join/Prune message received
alaPimNeighborUpTime—The time since this PIM neighbor (last) became a neighbor of the local router.
page B-18
Objects
Family
alaPimGroup-
ipmr
MappingPim-
Mode
alaPimInvali-
dRegisterAd-
dressType
alaPimInvali-
dRegisterOri-
gin
alaPimInvali-
dRegister-
Group
alaPimInvali-
dRegisterRp
alaPimGroup-
ipmr
MappingPim-
Mode
alaPimInvalid-
JoinPruneAd-
dressType
alaPimInvalid-
JoinPruneOri-
gin
alaPimInvalid-
JoinPrune-
Group
alaPimInvalid-
JoinPruneRp
alaPimNeigh-
borUpTime
OmniSwitch 6250/6450 Switch Management Guide
SNMP Trap Information
Description
This trap is sent when an invalid
PIM Register message is
received.
The notification is generated
whenever the PIM Invalid Regis-
ter Message Reveived counter is
incremented, subject to the rate
limit specified by the Invalid
Register NotificationPeriod.
This trap is sent when an invalid
PIM Join/Prune message is
received.
The notification is generated
whenever the PIM Invalid Join
Prune Messages Recieved
counter is incremented, subject to
the rate limit specified by the
PIM Invalid Join/Prune Notifica-
tion Period.
June 2013

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6350Omniswitch 6250

Table of Contents