Multiple User Sessions; Listing Other User Sessions - Alcatel-Lucent OmniSwitch 6450 Management Manual

Using the CLI

Multiple User Sessions

Several CLI commands give you information about user sessions that are currently operating on the
OmniSwitch, including your own session. These commands allow you to list the number and types of
sessions that are currently running on the switch. You can also terminate another session, provided you
have administrative privileges.

Listing Other User Sessions

The who command displays all users currently logged into the OmniSwitch. The following example
shows use of the who command and a resulting display:
-> who
Session number = 0
User name = (at login),
Access type = console,
Access port = Local,
IP address = 0.0.0.0,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
Session number = 1
User name = admin,
Access type = http,
Access port = NS,
IP address = 123.251.12.51,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
Session number = 3
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 123.251.12.61,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
The above display indicates that three sessions are currently active on the OmniSwitch. Session number 0
always shows the console port whenever that port is active and logged in. The other sessions are identi-
fied by session number, user name, the type of access, port type, IP address, and user privileges. The
output definitions are defined in the table on
OmniSwitch 6250/6450 Switch Management Guide
= 0x00000000 0x00000000,
= 0x00000000 0x00000000,
= None,
= ,
= None,
= 0x00000000 0x00000000,
= 0xffffffff 0xffffffff,
= None,
= ,
= All ,
= 0x00000000 0x00000000,
= 0xffffffff 0xffffffff,
= None,
= ,
= All ,
page 6-23.
June 2013
Multiple User Sessions
page 6-22