Error Description Table - Alcatel-Lucent OmniSwitch 6450 Management Manual

Troubleshooting

Error Description Table

The following error description table provides information about some of the common script file errors
that occur during Automatic Remote Configuration:
Error Type Error
Script File
Download of Script file from
Download Primary Server Failed
Starting download of Script file:
<File name and pathname> from
Secondary Server
Download failed - <File name and
pathname> using Pri and Sec IP
Script File
Unable to remove Instruction
Command file <File name and pathname>
Failure
Error in executing the downloaded
script file
page 8-26
Managing Automatic Remote Configuration Download
Description
Script file cannot be downloaded from the
primary server.
Script file cannot be downloaded from both
primary and secondary server.
Instruction file cannot be removed from flash
due to error in running the script file
commands.
The downloaded script file cannot be run.
OmniSwitch 6250/6450 Switch Management Guide June 2013