Configuring The Switch With Webview; Accessing Webview - Alcatel-Lucent OmniSwitch 6450 Management Manual

Configuring the Switch With WebView

Configuring the Switch With WebView
The following sections provide an overview of WebView functionality. For detailed configuration proce-
dures, see other chapters in this guide, the OmniSwitch 6250/6450 Network Configuration Guide.

Accessing WebView

WebView is accessed using any of the browsers listed on
are stored on the switch. To access WebView and login to a switch:
1 Open a web browser.
2 Enter the IP address of the switch you want to configure in the browser Address field and press Enter.
The login screen appears.
3 Enter the appropriate user ID and password at the login prompt (the initial user name is admin and the
initial password is switch) and click Login. After successful login, the Chassis Management Home Page
appears.
Note. You can access WebView through any NI on the switch.
page 11-8
page 11-1. All of the necessary WebView files
WebView Login Page
OmniSwitch 6250/6450 Switch Management Guide
Using WebView
June 2013