Alcatel-Lucent OmniSwitch 6450 Management Manual page 344

SNMP Traps Table
No. Trap Name
66 monitorFileWritten
mirmonPrimarySlot — Slot of mirrored or monitored interface.
mirmonPrimaryPort — Port of mirrored or monitored interface.
monitorFileName — The name of the file in which the traffic will be stored (the default is
"PMONITOR.ENC").
monitorFileSize — The number of bytes in 16K (16384) increments allowed for the file (default 16384 bytes).
The file contains only the last monitorFileName bytes of the current port monitoring instance.
69 gmHwMixModeSubnetRuleTable-
OverloadAlert
gmSubnetRuleTable —Overloaded HW subnet rule table.
gmOverloadRuleSlice —Overloaded slot Id.
Note: This trap is not supported.
70 pethPwrSupplyConflict
pethSourceSlot—Slot number of generating entity.
71 pethPwrSupplyNotSupported
pethSourceSlot—Slot number of generating entity.
72 lpsPortUpAfterLearningWindowEx-
piredT
lpsTrapSwitchName—The name of the switch.
lpsTrapSwitchSlice—The slot number for the LPS port on which the violation occured
lpsTrapSwitchPort—The port number for the LPS port on which the violation occured
systemServicesDate—The current System Date in the following format: MM/DD/YYYY.
systemServicesTime—The current System Time in the following format: HH:MM:SS.
92
dot1agCfmFaultAlarm
gmSubnetRuleTable—Overloaded HW subnet rule table.
gmOverloadRuleSlice—Overloaded slot Id.
93 unused
page B-16
Objects Family
mirmonPrima- pmm
rySlot
mirmonPrimary-
Port
monitorFile-
Name
monitorFileSize
gmSubnetRule- vlan
Table
gmOverloadRu-
leSlice
pethSourceSlot chassis
pethSourceSlot chassis
lpsTrapSwitch- bridge
Name
lpsTrapSwitch-
Slice
lpsTrapSwitch-
Port
systemServices-
Date
systemServices-
Time
bridge
N/A N/A
OmniSwitch 6250/6450 Switch Management Guide
SNMP Trap Information
Description
A File Written Trap is sent when
the amount of data requested by
the user has been written by the
port monitoring instance.
An subnet overload trap occurs
in mixed mode whenever a new
entry to the HW subnet rule table
gets dropped due to the overload
of the table.
This trap is sent when there is a
power supply conflict in a POE
device.
This trap is sent when the power
supply is not supported.
This trap is sent when an LPS
port joins or is enabled after the
Learning Window is expired, dis-
abling the MAC address learning
on the port.
This trap is also generated at the
time the Learning Window
expires, with a slice and port
value of 0.
A
N/A
June 2013