Alcatel-Lucent OmniSwitch 6450 Management Manual page 347

Hide thumbs Also See for OmniSwitch 6450:
Table of Contents

Advertisement

SNMP Trap Information
No. Trap Name
99
alaPimRPMappingChange
alaPimGroupMappingPimMode—The PIM mode used for groups in this group prefix.
alaPimGroupMappingPrecedence—The value for alaPimGroupMappingPrecedence to be used for this static
RP configuration. This allows fine control over which configuration is overridden by this static configuration
100 alaPimInterfaceElection
alaPimInterfaceAddressType—The address type of the PIM interface.
alaPimInterfaceAddress—The primary IP address of this router on this PIM interface.
101 lpsLearnTrap
lpsLearnTrapThreshold—The number of bridged MAC addresses that can be learned before a trap is sent.
102 gvrpVlanLimitReachedEvent
alaGvrpMaxVlanLimit—The maximum number of dynamic VLANs that can be created on the system by
GVRP before a trap is sent.
alaNetSecPortTrapInfoIfId—The interface index of port on which anomaly is detected.
105 udldStateChange
alaUdldPortIfIndex—The interface index of the port which troggered the UDLD trap.
alaUdldPrevState—The previous UDLD state of the port - notapplicable (0), shutdown (1), undetermined (2),
bidirectional (3).
alaUdldCurrentState—he current UDLD state of the port - notapplicable (0), shutdown (1), undetermined (2),
bidirectional (3).
OmniSwitch 6250/6450 Switch Management Guide
Objects
Family
alaPimGroup-
ipmr
MappingPim-
Mode
alaPimGroup-
MappingPre-
cedence
alaPimInter-
ipmr
faceAd-
dressType
alaPimInter-
faceAddress
lpsLearn-
bridge
TrapThreshold
alaGvrpMaxV-
bridge
lanLimit
alaUdldPortIfIn-
interface
dex
alaUdldPre-
vState
alaUdldCurrent-
State
June 2013
SNMP Traps Table
Description
This trap is sent when a change is
detected to the active RP map-
ping on the device.
The notification is generated
whenever the PIM RP Mapping
Change Count is incremented,
subject to the rate limit specified
by PIM RP Mapping Change
Notification Period
This trap is sent when a new DR
or DR has been elected on a net-
work.
The notification is generated
whenever the counter PIM Inter-
face Elections Win Count is
incremented, subject to the rate
limit specified by PIM Interface
Election Notification Period.
This trap is sent when the num-
ber of bridged MACs learned
matches the configured Learned
Trap Threshhold. A trap is then
generated or every additional
MAC that is learned.
This trap is sent when the num-
ber of dynamically-learned
VLANs has reached the config-
ured limit.
This trap is sent when the UDLD
state of a port has changed.
page B-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6350Omniswitch 6250

Table of Contents