Alcatel-Lucent OmniSwitch 6450 Management Manual page 192

Using the CLI
4 Press the spacebar <sp> key to execute the filter option. The following is displayed.
Enter filter pattern: *vlan*
8193 dot1qBase
8194 dot1qVlan
8195 dot1qVlanCurrentTable
8196 dot1qVlanStaticTable
8197 vlanMgrVlanSet
8198 vlanTable
8199 vpaTable
9217 vCustomRuleTable
9218 vDhcpGenericRuleTable
9219 vDhcpMacRuleTable
More? [next screen <sp>*, next line <cr>*, filter pattern </>*, quit <q>]
The screen displays ten table rows, each of which contain the text pattern "vlan". Alcatel-Lucent CLI uses
a single level command hierarchy. (The screen rows shown above and below the table are not counted as
part of the 10 rows.) If you want to display the rows one line at a time, press Enter instead of the space bar
key. To exit the table, type the "q" character and the CLI exits the
system prompt.
OmniSwitch 6250/6450 Switch Management Guide
vlan
vlan
vlan
vlan
vlan
vlan
vlan
vlan
vlan
vlan
more
June 2013
Application Example
mode and return you to the
page 6-26