Alcatel-Lucent OmniSwitch 6450 Management Manual page 345

SNMP Trap Information
No. Trap Name
94 lldpRemTablesChange
lldptatsRemTablesInserts—The number of times the complete set of information advertised by a particular
MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects.
lldptatsRemTablesDeletes—The number of times the complete set of information advertised by a particular
MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects
lldptatsRemTablesDrops—The number of times the complete set of information advertised by a particular
MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because
of insufficient resources
lldptatsRemTablesAgeouts—The number of times the complete set of information advertised by a particular
MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because
the information timeliness interval has expired.
95 chassisTrapsPossibleDuplicateMac
physicalIndex—The Physical index of the involved object.
baseMacAddress—The base MAC Address.
96 alaPimNeighborLoss
alaPimNeighborUpTime—The time since this PIM neighbor (last) became a neighbor of the local router.
OmniSwitch 6250/6450 Switch Management Guide
Objects Family
lldptatsRemTa- aip
blesInserts
lldptatsRemTa-
blesDeletes
lldptatsRemTa-
blesDrops
lldptatsRemTa-
blesAgeouts
physicalIndex chassis
baseMacAddress
alaPimNeigh- ipmr
borUpTime
June 2013
SNMP Traps Table
Description
This trap is sent when the value
ofthe LLDP Stats Rem Table
Last ChangeTime changes. It
can be utilized by an NMS to
trigger LLDP remote systems
table maintenance polls.
This trap is sent when there is a
possiblity of duplicate a MAC
address in the network.
This trap is sent when an adja-
cency with a neighbor is lost.
The notification is generated
when the neighbor timer expires,
and the router has no other neigh-
bors on the same interface with
the same IP version and a lower
IP address than itself.
The notification is generated
whenever the PIM NeighborLoss
Count is incremented, subject to
the rate limit specified by the
PIM Neighbor Loss Notification-
Period.
page B-17