Alcatel-Lucent OmniSwitch 6450 Management Manual page 333

SNMP Trap Information
No. Trap Name
11 chassisTrapsStateChange
physicalIndex—The physical index of the involved object.
chassisTrapsObjectType—An enumerated value that provides the object type involved in the alert trap.
chassisTrapsObjectNumber—A number defining the order of the object in the set (e.g., the number of the con-
sidered fan or power supply). This intends to clarify as much as possible the location of the failure or alert. An
instance of the appearance of the trap could be "failure on a module. Power supply 3".
chasEntPhysOperStatus—An enumerated value that indicates the operational status of installed modules
(includes empty slots).
12 chassisTrapsMacOverlap
physicalIndex—The physical index of the involved object.
chasTrapMacRangeIndex—The MAC range index of the involved object.
15 healthMonDeviceTrap
healthMonRxStatus—Rx threshold status indicating if threshold was crossed or no change.
healthMonRxTxStatus— RxTx threshold status indicating if threshold was crossed or no change.
healthMonMemoryStatus—Memory threshold status indicating if threshold was crossed or no change.
healthMonCpuStatus—CPU threshold status indicating if threshold was crossed or no change.
healthMonCmmTempStatus—CMM temperature threshold status indicating if threshold was crossed or no
change.
healthMonCmmCpuTempStatus—CMM CPU temperature threshold status indicating if threshold was
crossed or no change.
OmniSwitch 6250/6450 Switch Management Guide
Objects Family
physicalIndex chassis
chassisTrapsOb-
jectType
chassisTrapsOb-
jectNumber
chasEntPhysOp-
erStatus
physicalIndex module
chasTrapMacRa-
ngeIndex
healthMonRx- health
Status
healthMonRxTx-
Status
healthMonMem-
oryStatus
healthMonC-
puStatus
healthMonCm-
mTempStatus
healthMonCm-
mCpuTemp-
Status
June 2013
SNMP Traps Table
Description
An NI status change was
detected.
A MAC range overlap was found
in the backplane eeprom.
Indicates a device-level threshold
was crossed.
page B-5