Automatic Remote Configuration Specifications; Chapter 8 Managing Automatic Remote Configuration Download - Alcatel-Lucent OmniSwitch 6450 Management Manual
Hide thumbs
Also See for OmniSwitch 6450:
- User manual (136 pages) ,
- Getting started manual (22 pages) ,
- Management manual (346 pages)
Table of Contents
Advertisement
Automatic Remote Configuration Specifications
Automatic Remote Configuration Specifications
Platforms Supported
DHCP Specifications
File Servers
Clients supported
Instruction file
Maximum length of username
for FTP/SFTP file server.
Nearest Edge MAC Address
Feature Supported only on
switch bootup in Remote
Configuration Load Mode (no
boot.cfg file present).
Unsupported Features:
page 8-2
Managing Automatic Remote Configuration Download
OmniSwitch 6250, 6450
DHCP Server required
Temporary DHCP Client on VLAN 1 or VLAN 127
(DHCP client on VLAN 127 only works on combo and uplink
ports)
TFTP
FTP/SFTP
TFTP
FTP/SFTP
Maximum length of:
• Pathname: 255 characters
• Filename: 63 characters
15 characters
01:20:da:02:01:73
LACP Auto Detection and Link Aggregate
Association (operates only on combo ports and uplink ports).
• ISSU and IPv6 are not supported.
• Upgrade of uboot, miniboot, or FPGA files is not
supported.
OmniSwitch 6250/6450 Switch Management Guide
June 2013
Advertisement
Table of Contents
