Alcatel-Lucent OmniSwitch 6450 Management Manual page 334

SNMP Traps Table
No. Trap Name
16 healthMonModuleTrap
healthModuleSlot—The (one-based) front slot number within the chassis.
healthMonRxStatus—Rx threshold status indicating if threshold was crossed or no change.
healthMonRxTxStatus—RxTx threshold status indicating if threshold was crossed or no change.
healthMonMemoryStatus—Memory threshold status indicating if threshold was crossed or no change.
healthMonCpuStatus—CPU threshold status indicating if threshold was crossed or no change.
17 healthMonPortTrap
healthPortSlot—The physical slot number for this port.
healthPortIF—The on-board interface number.
healthMonRxStatus—Rx threshold status indicating if threshold was crossed or no change.
healthMonRxTxStatus—RxTx threshold status indicating if threshold was crossed or no change.
20 esmDrvTrapDropsLink
esmPortSlot—The physical slot number for this Ethernet Port. The slot number has been added to be used by
the private trap.
esmPortIF—The on-board interface number for this Ethernet port. The port number has been added to be used
by the private trap.
ifInErrors—For packet-oriented interfaces, the number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors preventing them from being deliverable to a higher-
layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management sys-
tem and at other times as indicated by the value of ifCounterDiscontinuityTime.
ifOutErrors—For packet-oriented interfaces, the number of outbound packets that could not be transmitted
because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units
that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-ini-
tialization of the management system and at other times as indicated by the value of ifCounterDiscontinuity-
Time.
esmDrvTrapDrops— Partitioned port (separated due to errors).
page B-6
Objects Family
healthModule- health
Slot
healthMonRx-
Status
healthMonRxTx-
Status
healthMonMem-
oryStatus
healthMonC-
puStatus
healthPortSlot health
healthPortIF
healthMonRx-
Status
healthMonRxTx-
Status
esmPortSlot interface
esmPortIF
ifInErrors
ifOutErrors
esmDrvTrap-
Drops
OmniSwitch 6250/6450 Switch Management Guide
SNMP Trap Information
Description
Indicates a module-level thresh-
old was crossed.
Indicates a port-level threshold
was crossed.
This trap is sent when the Ether-
net code drops the link because
of excessive errors.
June 2013