Listing Your Current Login Session - Alcatel-Lucent OmniSwitch 6450 Management Manual

Multiple User Sessions

Listing Your Current Login Session

To list information about your current login session, use the who command and identify your login by
your IP address or enter the whoami command. The following is displayed:
-> whoami
Session number = 4
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 148.211.11.02,
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
End-User profile
This display indicates that the user is currently logged in as session number 4, under the user name
"admin," using a Telnet interface, from the IP address of 148.211.11.02.
Session Number
User name
Access type
Access port
Ip Address
Read-only domains
Read-only families
Read-Write domains
Read-Write families
page 6-23
= None,
= ,
= All ,
=
The session number assigned to the user.
User name.
Type of access protocol used to connect to the switch.
Switch port used for access during this session.
User IP address.
The command domains available with the read-only access of the user.
See the table beginning on
The command families available with the read-only access of the user.
See the table beginning on
The command domains available with the read-write access of the user.
See the table beginning on
The command families available with the read-write access of the user.
See the table beginning on
OmniSwitch 6250/6450 Switch Management Guide
page 6-24 for a listing of valid domains.
page 6-24 for a listing of valid families.
page 6-24 for a listing of valid domains.
page 6-24 for a listing of valid families.
Using the CLI
June 2013