Managing Switch User Accounts
How User Settings Are Saved
Unlike other settings on the switch, user settings configured through the
the switch configuration automatically. These settings are saved in real time in the local user database.
At bootup, the switch reads the database file for user information (rather than the boot.cfg file). The
memory,
copy running-config
user or password settings over a reboot.
Note. Password settings configured through the user password-policy commands are not automatically
saved to the switch configuration.
For information about using the write memory, copy running-config working, and configuration
snapshot commands, see
Configuration Files,"
OmniSwitch 6250/6450 Switch Management Guide
working, or
configuration snapshot
Chapter 5, "Managing CMM Directory Content," Chapter 7, "Working With
and the OmniSwitch 6250/6450 CLI Reference Guide.
June 2013
Overview of User Accounts
password
command are saved to
commands are not required to save
write
page 9-11